Troubleshooting Guide - Pressroom Conventional
On Press Issue: Misting
Potential Causes
Too much ink on rollers
Solution: Reduce amount of ink carried, increase ink strength to allow carrying less ink on rollers.
Ink/water balance incorrect
Solution: Adjust ink/water balance. Try reducing ink and water.
Ink body too long
Solution: Make shorter body.
Rollers set incorrectly
Solution: Reset rollers to specification.
Rollers in poor condition
Solution: Replace rollers as needed.
Excessive heat on press
Solution: Heat messures on press rollers over 90 degrees F could cause misting.
